Panasonic

How To Program

SEARCH RESULTS

A. If in "Program Lock" mode, (Oven cooks by just pressing the programmed pad (no need to press the "Start" pad)) - you must go into the "Program UNLock" mode to Program. – to do this:
how-to-program-steamer-step-A1
1. Remove the filter screens.
how-to-program-steamer-step-A2
2. Press and HOLD the "Prog Lock" button until a "P" appears in the display (about 5 seconds). If a "P L" appears, the oven WAS in Program UNLock. Just press and HOLD the "Prog Lock" button again until the "P" appears.
 
B. To program one of the pads for a new menu item:
Example: To Program Pad #1 for 1:00 Minute:
how-to-program-steamer-step-B1
1. With the door closed and the filter screens removed:
2. Press the "Prog" pad ("prog" should flash in the display.)
how-to-program-steamer-step-B3
3. Press the numbered pad you wish to re-program.
how-to-program-steamer-step-B4
4. Press the "Power Level" pad (this will clear any existing time and put the oven in "High" power).
how-to-program-steamer-step-B5
5. Press the numbered pads that will enster the time (7 then 0 then 0 for 7:00)
how-to-program-steamer-step-B6
6. Press the "Prog" pad.
7. You now have programmed the pad – you can continue to program other pads by repeating steps 2 - 6 or return to "Program Lock" (one touch operation).
8. To return to "Program Lock" – just press and hold the "Prog Lock" button until a "P L" appears in the display (about 5 seconds).
how-to-program-steamer-step-B9
9. Replace the Filter Screens.