Sorry, you need to enable JavaScript to visit this website.

PT-RZ475U 1-Chip DLP™ Fixed Installation Laser Projector Discontinued

  • Chat with Sales
  • Contact us

PT-RZ475

Product details

Short Throw Solid Shine LED/laser combined projector
Ideal for rear projection and extremely long-term continuous operation for use in control rooms or digital signage

Key features

  • LED/ Laser 1-chip DLP, 3000 lumens, Full HD
  • LED/Laser light source enables up to 87,600 hours (10 years) of maintenance free usage
  • Excellent TCO with 24/7 operation and DIGITAL LINK connectivity
  • Ideal for rear projection. System expandability with Portrait mode installation capability and edge blending
  • 20,000:1 contrast ratio
  • Digital Link
  • 24/7 Operation
  • Solid Shine (Lamp Free)
  • 3D Full HD
  • Portrait Projection
View Product Support

Chat with Sales

Specification Description
Power supply 100-240 V AC, 5.0-1.8 A, 50/60 Hz
Power consumption 430 W (440 VA) (230 W with LIGHT POWER set to NORMAL/Eco1, 170 W with LIGHT POWER set to Eco2. 0.5 W with STANDBY MODE set to ECO, 8 W with STANDBY MODE set to NORMAL)
DLP™ chip Panel size 16.5 mm (0.65 in) diagonal (16:9 aspect ratio)
DLP™ chip Display method DLP™ chip x 1, DLP™ system
DLP™ chip Pixels 2,073,600 (1,920 x 1,080) x 1, total of 2,073,600 pixels
LENS Auto focus, F 1.8, f 11.9 mm
Throw ratio 0.8:1
Light source LED/laser-combined (R, B: LED; G: laser diode)
Screen size 1.02-5.08 m (40-200 inches) diagonally, 16:9 aspect ratio
Brightness 3,000 lm (power mode: normal),1,600 lm (power mode: Eco1), 1,000 lm (power mode: Eco2)
Center-to-corner uniformity 90%
Contrast 20,000:1 (full on/off)
Resolution 1,920 x 1,080 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,080 pixels.)
Scanning Frequency (HDMI/DVI-I (Digital)) fH: 27-100 kHz, fV: 24-120 Hz, dot clock: 25-162 MHz
Scanning Frequency (DVI-I (Analog)/RGB) fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 162 MHz or lower
Scanning frequency YPBPR (YCBCR) 480i(525i): fH 15.75 kHz; fV 60 Hz, 576i(625i): fH 15.63 kHz; fV 50 Hz, 480p(525p): fH 31.50 kHz; fV 60 Hz, 576p(625p): fH 31.25 kHz; fV 50 Hz, 720(750) / 60p: fH 45.00 kHz; fV 60 Hz, 720(750) / 50p: fH 37.50 kHz; fV 50 Hz,1035(1125) / 60i: fH 33.75 kHz; fV 60 Hz, 1080(1125) / 60i: fH 33.75 kHz; fV 60 Hz, 1080(1125) / 50i: fH 28.13 kHz; fV 50 Hz, 1080(1125) / 25p: fH 28.13 kHz; fV 25 Hz, 1080(1125) / 24p: fH 27.00 kHz; fV 24 Hz, 1080(1125) / 24sF: fH 27.00 kHz; fV 48 Hz,1080(1125) / 30p: fH 33.75 kHz; fV 30 Hz, 1080(1125) / 60p: fH 67.50 kHz; fV 60 Hz, 1080(1125) / 50p: fH 56.25 kHz; fV 50 Hz
Scanning Frequency (Video) fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]; fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift Vertical: ±10% (manual), Horizontal: ±3.4% (manual)
Keystone correction range Vertical: ±40°
Installation Ceiling/floor, front/rear
Terminals HDMI IN HDMI 19-pin x 1, HDCP compatible, Deep Color compatible; 480p(525p), 576p(625p), 720(750)/60p, 720(750)/50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz, audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
Terminals DVI-I IN DVI-I 29-pin x 1
Terminals DVI-I IN Digital DVI 1.0 compliant, HDCP compatible, for single link only; 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz
Terminals DVI-I IN R, G, B R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: TTL, high impedance, positive/negative automatic; NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
Terminals DVI-I IN Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Terminals COMPUTER(RGB) IN D-sub HD 15-pin(female) x 1
Terminals COMPUTER(RGB) IN R, G, B R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: TTL, high impedance, positive/negative automatic; NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals
Terminals COMPUTER (RGB) IN Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Terminals VIDEO IN Pin jack x 1, 1.0 Vp-p, 75 ohms
Terminals AUDIO IN M3(L, R) x 1, 0.5 Vrms
Terminals AUDIO OUT M3(L, R) x 1(monitor out: 0-1.8 Vrms, variable)
Terminals SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals LAN/DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK (video/audio/network/serial control) connection, 100Base-TX, compatible with PJLink™, HDCP compatible, Deep Color compatible, 480p(525p), 576p(625p), 720(750)/60p, 720(750)/50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz
Terminals 3D SYNC OUT Mini DIN 3-pin x 1, for 3D transmitter connection
Power cord length 3.0 m (9 ft 10 in)
Cabinet materials Molded plastic
Dimensions (W x H x D) 455 x 137 x 409 mm (17-29/32 x 5-13/32 x 16-11/32 inches) (lens included)
Weight Approx. 11.5 kg (24.3 lbs)
Operation noise 35 dB (LIGHT SOURCE MODE: NORMAL)
Operating temperature 0℃ - 45℃(32℉ - 113℉)
Operating humidity 20% - 80%(no condensation)
Technology 1-chip DLP LED/ Laser
<sup>(1)</sup> Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.<br/>
<sup>(2)</sup> Measured at center area of projector screen. Measurement method is in compliance with ISO/IEC 21118: 2012. Value is average of all products when shipped. May differ depending on actual unit.